Direct Displacement Based Design of RDC Frame-Shear Wall Structures

Basit Öğe Kaydı
dc.contributor.authorBalkaya, Can
dc.contributor.authorEtemadi, Ali
dc.contributor.authorGenç, Öznur
dc.date.accessioned2025-03-26T13:52:48Z
dc.date.available2025-03-26T13:52:48Z
dc.date.issued2021
dc.departmentİstanbul Esenyurt Üniversitesi
dc.description.abstractA large part of Turkey's urban region is located in the seismic prone zone and in terms of population, the majority of densely populated cities are located close to near-fault regions. It is very important to determine the behaviors of structures against external forces after destructive earthquakes. Structural and non-structural damages that occur during the earthquake usually arise from lateral displacements occurring in the structural system. This is why, in recent years, the displacement-based design has become more important when compared to the force based design. In this study, the Direct Displacement Based Design method under earthquake forces are explained. The process steps of this method on a frame-wall structure are clarified. The dynamic behavior of a moment resistant structures and a combined system with shear walls are compared. The finite element method used to analysis of reinforced concrete building models. Some model with moderate and high vibration period is adopted for dynamic analysis. An arrangement of the shear walls is changed in story plan of models. The dynamic analysis has shown quite different response among the structural systems. The difference in dynamic behavior is coming from the interaction of dynamic response between shear walls and moment resistant frames. Furthermore, the important role of shear walls displacements in transferring lateral loads is clarified with numerical examples. The positive role of RC shear walls on the combined structures under earthquake forces has been emphasized.
dc.identifier.doi10.19072/ijet.810934
dc.identifier.doihttps://doi.org/10.19072/ijet.810934
dc.identifier.endpage65
dc.identifier.issn2149-0104
dc.identifier.issn2149-5262
dc.identifier.issue3
dc.identifier.startpage54
dc.identifier.urihttps://hdl.handle.net/20.500.14704/268
dc.identifier.volume7
dc.language.isoen
dc.publisherİstanbul Gelişim Üniversitesi
dc.relation.ispartofInternational Journal of Engineering Technologies
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20250326
dc.subjectDisplacement based design
dc.subjectinterstory drift
dc.subjectshear walls
dc.subjectfinite element method
dc.titleDirect Displacement Based Design of RDC Frame-Shear Wall Structures
dc.typeReview Article

Dosyalar

Koleksiyon

Öksüz Yayınlar Koleksiyonu